3D printing from the training process of students of Higher Technology in Electromechanics

3D printing from the training process of students of Higher Technology in Electromechanics

Authors

  • Rodrigo Andrés Cárdenas Yánez Pontificia Universidad Católica del Ecuador, Ecuador
  • Edison Javier Segovia Corrales Instituto Superior Universitario Cotopaxi, Ecuador
  • Bruno Gabriel Amores Vallecilla Instituto Superior Universitario Cotopaxi, Ecuador

Keywords:

Student training process, Fused Deposition Molding Printing, PLA, ABS, TPU, tensile test

Abstract

The following article focuses on training students in 3D printing. Describes the training process in the use of 3D printers, material handling and printing parameters for PLA, ABS and TPU. The importance of this training in the development of technical skills and in improving employability in the electromechanical field stands out. The experimental design includes the 3D printing of 6 specimens to evaluate their mechanical properties. The results provide valuable information for applications in the design and manufacture of parts in the electromechanical field.

References

Carpio, G. I. (2019). Análisis de tracción de probetas impresas en 3D mediante deposición de hilo fundido de PLA, ABS y PLA/MLO. [Trabajo de Grado]. Cuenca, Ecuador.

Casares. (2019). Impresora 3D Profecional Zortrax M200. Barcelona.

Del Médico Bravo, A. J. (2017). Propiedades mecánicas de componentes fabricados. [Trabajo de Fin de Grado. Universidad de La Laguna].

Ibarra H., A. F., Cruel Restrepo, C. A. & Díaz Castaño, D. R. (2018). Caracterización de las Propiedades Mecánicas de Probetas Fabricadas bajo la Técnica de Modelado por Deposición Fundida. [Tesis de Grado Ingeniería Aeronáutica]. Bogotá. Facultad de Ingeniería.

León, M., & Marcos-Fernández, Á. (2019). Impresión 3D con materiales elástoméricos. Revista De Plásticos Modernos, 118(747).

Mail. (2020). Filamento flex. Europa. https://3dlaboratorio.es/plastic-flex.htm

Molina, O. y Jaime, V. (2016). Caracterización de materiales termoplásticos de ABS y PLA semi-rígidos impresos en 3D con cinco mallados internos diferentes. [Tesis de Maestría. Escuela Politécnica Nacional de Quito].

Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. y Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143(15), 172-196.

O'Connell, A. (2021). ABS vs PLA: Comparación de filamentos para impresión 3D. https://all3dp.com/es/2/abs-vs-pla-filamento-impresion-3d-plastico/

Romero, A. (2018). Actividades de aula en el ámbito de la Tecnología con impresoras 3D. Universidad de Valladolid. https://uvadoc.uva.es/handle/10324/33338

Downloads

Published

2023-09-28

How to Cite

Cárdenas Yánez, R. A., Segovia Corrales, E. J., & Amores Vallecilla, B. G. (2023). 3D printing from the training process of students of Higher Technology in Electromechanics: 3D printing from the training process of students of Higher Technology in Electromechanics. Maestro Y Sociedad, 20(3), 845–851. Retrieved from https://maestroysociedad.uo.edu.cu/index.php/MyS/article/view/6133

Issue

Vol. 20 No. 3 (2023)

Section

Artículos

License

Copyright (c) 2023 Rodrigo Andrés Cárdenas Yánez, Edison Javier Segovia Corrales, Bruno Gabriel Amores Vallecilla

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This journal provides immediate open access to its content, based on the principle that offering the public free access to research helps a greater global exchange of knowledge. Each author is responsible for the content of each of their articles. 

Most read articles by the same author(s)