3D printing from the training process of students of Higher Technology in Electromechanics
3D printing from the training process of students of Higher Technology in Electromechanics
Abstract
The following article focuses on training students in 3D printing. Describes the training process in the use of 3D printers, material handling and printing parameters for PLA, ABS and TPU. The importance of this training in the development of technical skills and in improving employability in the electromechanical field stands out. The experimental design includes the 3D printing of 6 specimens to evaluate their mechanical properties. The results provide valuable information for applications in the design and manufacture of parts in the electromechanical field.
References
Carpio, G. I. (2019). Análisis de tracción de probetas impresas en 3D mediante deposición de hilo fundido de PLA, ABS y PLA/MLO. [Trabajo de Grado]. Cuenca, Ecuador.
Casares. (2019). Impresora 3D Profecional Zortrax M200. Barcelona.
Del Médico Bravo, A. J. (2017). Propiedades mecánicas de componentes fabricados. [Trabajo de Fin de Grado. Universidad de La Laguna].
Ibarra H., A. F., Cruel Restrepo, C. A. & Díaz Castaño, D. R. (2018). Caracterización de las Propiedades Mecánicas de Probetas Fabricadas bajo la Técnica de Modelado por Deposición Fundida. [Tesis de Grado Ingeniería Aeronáutica]. Bogotá. Facultad de Ingeniería.
León, M., & Marcos-Fernández, Á. (2019). Impresión 3D con materiales elástoméricos. Revista De Plásticos Modernos, 118(747).
Mail. (2020). Filamento flex. Europa. https://3dlaboratorio.es/plastic-flex.htm
Molina, O. y Jaime, V. (2016). Caracterización de materiales termoplásticos de ABS y PLA semi-rígidos impresos en 3D con cinco mallados internos diferentes. [Tesis de Maestría. Escuela Politécnica Nacional de Quito].
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. y Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143(15), 172-196.
O'Connell, A. (2021). ABS vs PLA: Comparación de filamentos para impresión 3D. https://all3dp.com/es/2/abs-vs-pla-filamento-impresion-3d-plastico/
Romero, A. (2018). Actividades de aula en el ámbito de la Tecnología con impresoras 3D. Universidad de Valladolid. https://uvadoc.uva.es/handle/10324/33338
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Rodrigo Andrés Cárdenas Yánez, Edison Javier Segovia Corrales, Bruno Gabriel Amores Vallecilla
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
This journal provides immediate open access to its content, based on the principle that offering the public free access to research helps a greater global exchange of knowledge. Each author is responsible for the content of each of their articles.
Universidad de Oriente 